Before & After overlay should support both landscape orientations

Claudya Chartier

CoCam Community Legend
Oct 13, 2026
1
2
When a Before photo is taken in landscape with the phone’s cameras on the left, the ghost overlay in “Take After Photo” appears upside down (rotated 180°). The only workaround is to flip the phone to the opposite landscape orientation, which makes it hard to match the original angle — the whole point of the overlay.


Why it matters: many trades shoot in landscape because portrait framing is too tight on the subject (ducts, equipment, rooms, roofs). Techs naturally hold the phone either way, so the overlay should work either way.


Suggested fix: rotate the ghost image to follow the phone’s actual orientation, or detect how the Before photo was taken and match it.


Device: Apple and Android


If you shoot Before & Afters in landscape, please upvote!
 
Hi Claudya, thanks for such a clear write-up! 🙌 This is exactly the kind of detail that helps us see what’s happening in the field.

You’re right: if the Before is shot in landscape with the cameras on the left, the ghost overlay in the After camera shows up upside down today, and it doesn’t rotate to follow how you’re holding your phone. That isn’t something CompanyCam can do yet, and we know it makes lining up the shot harder than it should be.

A couple of things can help in the meantime:
  • Flip to the opposite landscape for the After shot. The overlay lines up, and the finished Before & After still comes out right side up.
  • Pair existing photos instead. Shoot the After however feels natural, then open the Project, tap Select, choose your Before, tap the three-dot menu, and pick Choose After Photo. Step-by-step is in our Before & After Help Center article.
We’re passing your idea (rotating the overlay to match the phone’s orientation) along to our Camera team. Feedback like this helps shape what gets prioritized.
 
Upvote 0